Site under construction
SMA WebBox Bluetooth compatible

Is your WebBox dead?
theSolarlink. is here to replace it.

A small Greek-made gateway that brings live monitoring back to your solar plant — with the inverters you already own.

  • A new reading every ~70 seconds — you see the plant almost in real time, not once every quarter of an hour
  • Bluetooth for the older inverters — the same channel the WebBox used, with PIN, PUK and NetID
  • RS485 for newer inverters and meters
  • A network cable to the internet — no WiFi, no dependencies

SMA WebBox Bluetooth compatibleWebBox Bluetooth equivalent

replaces this
SMA Sunny WebBox theSolarlink. — the gateway in its red aluminium enclosure

SMA WebBoxtheSolarlink.

Watch it happen

From the box to the first reading

One continuous shot, no cuts, with the timer running from start to finish. However long the video lasts is how long it takes at your plant.

  1. 1Screw on the antenna
  2. 2Connect power
  3. 3Plug in the network cable

No inverter is opened and no production setting is touched.

XX:XX

The whole installation

video goes here — unboxing, three moves, first reading on screen

How it works

Three steps. Nothing changes in your inverters’ production settings.

Your inverters Bluetooth (older) RS485 (newer) theSolarlink. reads every ~70s buffers what it cannot send encrypted connection Router a plain LAN cable Portal phone · computer history & alerts
  1. 1
    Step 1

    Mounting

    It goes next to the inverters. It needs power and one network cable — nothing else. The antenna sits outside the metal cabinet for a clean signal.

  2. 2
    Step 2

    Finding the inverters

    It finds older units over Bluetooth (using the plant’s PIN and PUKs, locked to your NetID so it never picks up a neighbour’s inverters) or reads the RS485 line.

  3. 3
    Step 3

    Upload & control

    It sends the readings to the portal on every cycle. You see production and faults; we change settings remotely, with no site visit.

your plant on the phone — illustration

Specifications

The essentials, without having to read a datasheet.

Inverter communicationSMA Bluetooth (mesh, PIN/PUK, NetID lock) — WebBox Bluetooth equivalent · RS485 / Modbus for newer units
Internet connectionEthernet 10/100, DHCP or static IP — no WiFi
Upload rate~70-second cycle, with a heartbeat on every cycle
If the line dropsIt stores readings locally and uploads them once the line is back
SecurityEncrypted connection with certificate validation · a 256-bit key per device · per-device revocation
Remote managementPUK, NetID, PIN and portal address are changed by us in seconds
UpdatesAutomatic, over the network, with signed firmware
BuildAluminium enclosure, external antenna, status LED
Power12–24V DC via terminal or USB-C 5V

10-year warranty · support from the workshop that builds it

the connections — illustration, photo pending

What connects where

Four points and the installation is done.

  • 1
    Power12–24V DC via terminal, or USB-C 5V
  • 2
    RS485 (A / B / GND)for newer inverters and meters, with 120Ω termination
  • 3
    Network (RJ45)one cable to your router
  • 4
    Antennascrews on outside — it must sit outside a metal cabinet

Side by side

What actually changes in the day-to-day running of the plant.

theSolarlink. in front of an SMA Sunny WebBox
The old one and the new one. Same job, half the size.
WebBox discontinued theSolarlink. in production
Availability No longer manufactured Built here, with spare parts
How often it sends Every few minutes Every ~70 seconds
Updates Require a site visit Arrive on their own, over the network
Bluetooth and RS485 A separate model for each bus Both buses in one device — Bluetooth compatible with older SMA units
Platform Third-party, unsupported Ours, with no third-party subscription
Support No longer exists A phone answered by an engineer

Repair or replace?

A repair buys time. A replacement settles it once.

Choose theSolarlink. when…

  • you don’t want to be back here in two years
  • you want live production data, not the occasional snapshot
  • you run several plants and travel is expensive
  • you want issues solved remotely, without a technician on site

New hardware, with spare parts and support — and updates that arrive over the network.

Tell us about your plant

Why you need it

Thousands of solar plants relied on the WebBox to send their data. The product has been discontinued, and every unit that fails cannot be replaced.

01

The WebBox cannot be replaced

When it burns out or freezes, there is no new one to install. The plant is left with no logging and no remote view.

Whatever is out there is second-hand

02

Older inverters have no network

They cannot reach the internet on their own. Without a gateway, the data stays locked inside the inverter.

Something has to ask them

03

You find the fault on the bill

An inverter that stopped on Monday and was noticed the following month is lost production that never comes back.

And it never comes back

Frequently asked questions

What we get asked most on the phone.

Will it work with my inverters?

It is SMA WebBox Bluetooth compatible: it covers the inverters that worked with the WebBox over Bluetooth, plus other manufacturers over RS485. Send us the models and quantity and we confirm before you order.

Do I have to change anything on the inverters?

No. No production setting is changed and no unit is opened. We only need the PUK and NetID you already have.

What happens if the internet drops?

The device keeps reading and stores the measurements locally. As soon as the line is back it uploads them automatically — nobody has to drive to the plant.

Does it need WiFi?

No, deliberately. It connects to your router by cable, so Bluetooth stays reserved for talking to the inverters.

Who installs it and how long does it take?

Any electrician or PV technician, in 10–20 minutes. It needs power, a network cable and the inverter details.

Who builds it and who supports it?

Aineas Techniki in Thessaloniki, Greece — the workshop that has been repairing inverters and WebBox units for over ten years. Support comes from the same people who build it.

Tell us what you have on site

We reply with compatibility and price, usually within one working day.

Fastest by phone

2310 607032

Monday – Friday, 09:00 – 17:00 (EET)

Or leave your details and we will get back to you